MARKETS

Markets we supply

Five sectors, one catalogue. Each market below lists the lines that fit it and why; the same products are filterable by market on the Products page.

AerospaceIndustrial CompositesStructural Strengthening and RetrofittingUnmanned SystemsAutomotive
Aerospace

Product lines

14

Published parts

57

Browse lines for Aerospace

Aerospace

Innovative advanced composite materials for aerospace

Composite materials play a crucial role in the aerospace industry where performance, weight reduction, and durability are paramount. These materials enable the manufacture of stronger, stiffer, and lighter aerostructures. Well-designed structures allow for enhanced operational performance, increased range and payload carrying capacity, and reduced emissions. Beyond structural benefits, composites allow airframes to withstand extremes in temperature and pressure gradients while integrating complex shapes and advanced features such as radar transparency and thermal resistance.

BHOR provides a wide range of cutting-edge composite raw materials, such as Carbon Fabrics, Prepregs, and Specialty chemicals to meet the stringent quality and performance standards expected of aerospace components. Through our internal R&D and development facilities, we also offer tailored advanced materials that improve functional capabilities such as EM transparency, hot zone protection, and thermal stability.

Use cases and the products that fit

Use case

High Tg epoxy prepreg systems for launch vehicles, payload adaptors and satellite components

High Tg (180°C), toughened epoxy hotmelt prepregs with good outgassing properties

Reinforcements: carbon and glass

Orientation: unidirectional and bidirectional

Use case

Toughened epoxy prepreg systems for internal satellite components

Standard Tg (125°C), toughened epoxy hot melt prepregs

Curing: autoclave and out of autoclave

Reinforcements: carbon, glass and aramid

Use case

Cyanate ester prepreg systems for radomes and high temperature components

Low dielectric constant, low tangent loss, high Tg (250–350°C)

Reinforcements: quartz, carbon, E-glass

Use case

Film adhesive systems for lightweight sandwich structures

Supported and unsupported adhesive films in a range of areal weights

High temperature epoxy adhesive films

Cyanate ester adhesive films

Use case

Epoxy Resins and Paste Adhesive Systems

BhorBond® EPCH, BhorBond® 5052, BhorBond® AV1138

Industrial Composites

Product lines

14

Published parts

76

Browse lines for Industrial Composites

Industrial Composites

Advanced Composite Materials for Sports, Medical and Industrial Applications

Enabling lightweight, high-performance products through advanced composite materials

From high-performance sporting equipment to specialised medical components and precision-engineered industrial parts, composite materials are transforming the way products are designed and manufactured.

BHOR provides a comprehensive range of advanced composite manufacturing materials, including carbon fibre and other reinforcement fabrics, epoxy and cyanate ester prepregs, specialised resin systems and adhesive solutions. Engineered to deliver an optimal combination of lightweight construction, high strength, stiffness, durability and design flexibility, our materials enable manufacturers to develop innovative composite products for a diverse range of applications.

With expertise in reinforcement fabrics, resin chemistry and composite material engineering, BHOR supports customers across different manufacturing technologies, including wet lay-up, resin infusion, prepreg processing and compression moulding. Our solutions can be tailored to meet specific requirements for mechanical performance, surface finish, processability and production efficiency.

Use cases and the products that fit

Use case

Sports equipment

The demand for lighter, stronger and more durable sporting equipment continues to drive the adoption of advanced composites. BHOR supplies carbon fibre fabrics, prepregs and resin systems for manufacturing high-performance sports and recreational products, including kayaks, paddles, helmets and other sporting equipment.

Our materials offer designers the flexibility to achieve application-specific combinations of strength, stiffness, impact resistance, weight reduction and surface aesthetics, helping manufacturers create products that deliver enhanced performance and durability.

Products

Use case

Medical & Healthcare

Composite materials offer significant advantages in medical equipment and healthcare applications, where lightweight construction, dimensional stability, stiffness and specialised functional properties are important.

BHOR supplies composite fabrics, prepregs and resin systems for applications such as X-ray table structures, medical equipment covers and enclosures, and prosthetic components. Our material solutions support the development of lightweight, durable and precisely engineered components, with material selection tailored to the functional and manufacturing requirements of each application.

Products

Use case

Industrial Applications

Across industrial sectors, composites are increasingly replacing conventional materials in applications where weight reduction, high mechanical performance, corrosion resistance and design flexibility offer tangible advantages.

BHOR provides reinforcement fabrics, prepregs and resin systems for manufacturing a wide variety of industrial composite components. These include machined components produced from carbon fibre laminates, equipment housings and covers, structural and functional parts, and specialised components manufactured using moulding and other composite processing technologies.

Our portfolio supports both conventional composite manufacturing processes and advanced production techniques, enabling manufacturers to develop application-specific solutions with consistent material performance and efficient manufacturing.

Products

Structural Strengthening and Retrofitting

Product lines

6

Published parts

42

Browse lines for Structural Strengthening and Retrofitting

Structural Strengthening and Retrofitting

FRP systems for rehabilitation, upgradation, maintenance and strengthening of civil structures

Engineered composite solutions for the rehabilitation, strengthening and life extension of structures

Ageing infrastructure, increasing structural demands and the need to extend the service life of existing assets have made advanced composite materials an increasingly important part of modern construction and rehabilitation practices. BHOR offers a comprehensive range of Fiber Reinforced Polymer (FRP) materials and epoxy systems for the strengthening, repair and rehabilitation of concrete, masonry, steel and timber structures. Our solutions combine high-performance carbon and glass fibre reinforcements with specialised resin systems and pultruded composite profiles to deliver lightweight, durable and efficient strengthening solutions. Designed to enhance structural capacity without adding significant dead load or compromising usable space, our materials support a variety of strengthening techniques, including Externally Bonded FRP systems (EBR, fabric wrapping and Near Surface Mounted (NSM) reinforcement.

From strengthening individual structural elements to rehabilitating critical infrastructure, BHOR brings together reinforcement technologies, resin chemistry and composite manufacturing expertise to support the growing adoption of FRP-based structural strengthening. With an integrated portfolio of BhorForce® Fabric Reinforcements, BhorTensor® Pultruded profiles and BhorBond® Epoxy systems, BHOR provides the essential materials for reliable, lightweight and durable structural strengthening solutions.

Use cases and the products that fit

Use case

Fabric reinforcements

BhorForce® Carbon and Glass fibre fabrics provide high tensile strength and excellent strength-to-weight characteristics for strengthening structural elements. Available in Unidirectional and Bidirectional configurations, these reinforcements offer flexibility in fibre orientation and design to address specific structural loading requirements.

They are suitable for strengthening and confinement of reinforced concrete beams, columns, slabs, walls and other structural elements, helping improve flexural capacity, shear resistance and confinement performance.

BhorForce® Unidirectional Carbon Fabrics, 200–900 gsm

BhorForce® Bidirectional Carbon Fabrics, 400 - 600 gsm

BhorForce® Unidirectional Glass Fabrics, 300–900 gsm

BhorForce® Bidirectional glass fabrics, 200–800 gsm

Use case

Pultruded Carbon Fibre Plates & Rods:

BhorTensor® pultruded carbon fibre plates and rods offer high tensile strength, stiffness and dimensional consistency for structural strengthening applications.

Carbon Fibre plates and rods are used in externally bonded reinforcement (EBR) and Near Surface Mounted (NSM) reinforcement systems for flexural strengthening of beams, slabs and other structural members provide an effective solution for enabling additional flexural and shear strengthening of the structural elements.

These precured profiles offer a lightweight, corrosion-resistant alternative to conventional steel reinforcement in suitable applications.

BhorTensor® Carbon Laminates, Width: 50 & 100 mm, Thickness 1.2, 1.4, 2.4, 3 mm

BhorTensor® Carbon Rods, Diameter: 8, 10, 12 mm, Length: up to 9 m

Use case

Epoxy Resin Systems & Structural Adhesives

A reliable FRP strengthening system depends on the performance of its resin and adhesive components. BhorBond® offers a specialised range of epoxy systems developed for surface preparation, fibre impregnation, bonding and installation of composite reinforcement materials.

The range includes Epoxy Primers for substrate preparation, Putties for surface levelling, Saturants for wet lay-up FRP systems and Structural Adhesives for bonding precured carbon fibre plates, rods and other reinforcement components.

Designed to work alongside BhorForce® Fabrics and BhorTensor® Pultruded Profiles, these systems form an integrated material solution for FRP strengthening applications.

BhorBond® CPT Epoxy Putty

BhorBond® CPR Epoxy Primer

BhorBond® CSA Epoxy Saturant

BhorBond® CAD Epoxy Adhesive

Use case

Specialised FRP Reinforcement Solutions

In addition to conventional fabric and plate reinforcement systems, BHOR offers specialised composite reinforcement products such as carbon fibre grids and anchors.

These products support specialised strengthening and connection techniques, providing additional flexibility for structural rehabilitation projects involving complex geometries, localised reinforcement and anchorage requirements.

BhorForce® CarboGrid Carbon Fiber Grids

BhorForce® Anchors

Unmanned Systems

Product lines

14

Published parts

74

Browse lines for Unmanned Systems

Unmanned Systems

Composite materials for remotely operated unmanned systems

Unmanned systems such as UAVs, ROVs and UUVs have become indispensable across sectors. Often deployed in extreme environments such as high altitudes, deep underwater or hazardous terrains, their operational efficiency depends heavily on structural integrity. Composites have emerged as the material of choice due to their excellent strength-to-weight ratio along with resistance to impact and environmental degradation.

BHOR provides a diverse range of lightweight composite intermediates designed to enhance the structural efficiency of unmanned systems, contributing to extended operational range, increased operational period and higher payload capacities. BHOR also offers advanced materials which enable improved functional capabilities for wireless operation and communication.

Use cases and the products that fit

Use case

Ultra-light weight carbon fiber reinforcements for weight critical applications

Unidirectional carbon fabrics 100 and 160 gsm

Bidirectional carbon fabrics 88, 100, 120 and 160 gsm

Products

Use case

3K carbon fabrics for light weight structural and non-structural components

Unidirectional carbon fabrics 200 gsm

Bidirectional carbon fabrics 200, 240 and 280 gsm

Products

Use case

Glass and aramid fabrics

Bidirectional glass fabrics 80 to 600 gsm for light weight, cost effective production

Bidirectional aramid fabrics 160 to 440 gsm for abrasion, impact mitigation and flexible joints such as leading edges, landing gear and flap joints

Products

Use case

Prepregs for consistency, throughput and light weight

Unidirectional and bidirectional epoxy prepregs in carbon, aramid and glass

Toughened and high Tg epoxy prepregs

Snap cure prepregs for faster production cycles

Use case

Film adhesive systems for lightweight sandwich structures

Supported and unsupported adhesive films in a range of areal weights

Automotive

Product lines

12

Published parts

68

Browse lines for Automotive

Automotive

High-performance composite materials for next-generation vehicles

The automotive industry is continuously evolving, with increasing emphasis on vehicle lightweighting, performance enhancement, electrification and distinctive design. Advanced composite materials are playing an important role in this transformation, enabling manufacturers to develop components that combine high strength, stiffness, reduced weight and exceptional surface aesthetics.

BHOR offers a comprehensive range of carbon fibre reinforcements, epoxy prepregs and specialised resin systems for automotive composite manufacturing. From structural and semi-structural components for electric and performance vehicles to premium cosmetic enhancements and aftermarket applications, our materials support diverse manufacturing requirements across the automotive industry.

With solutions suitable for prepreg processing, hand lay-up, resin infusion and composite surface enhancement, BHOR enables manufacturers to achieve application-specific combinations of mechanical performance, production efficiency and visual appeal.

Use cases and the products that fit

Use case

Electric & Next-Generation Vehicles

Lightweight construction is an important consideration in electric vehicle development, where reducing component weight can contribute to improved vehicle efficiency and driving range. Carbon fibre composites offer an attractive solution for developing lightweight structural and non-structural components without compromising mechanical performance.

BHOR supplies carbon fibre fabrics, epoxy prepregs and resin systems for manufacturing lightweight automotive components, body panels, enclosures, interior structures and other application-specific parts. Our material portfolio supports both conventional composite manufacturing and advanced production processes suited to evolving electric vehicle platforms.

Products

Use case

Motorsport & Performance Vehicles

Motorsport and high-performance automotive applications demand materials that deliver exceptional strength-to-weight ratios, stiffness, dimensional stability and reliability under demanding operating conditions.

BHOR's carbon fibre prepregs, unidirectional reinforcements and bidirectional woven prepregs support the manufacture of high-performance composite components for race cars, performance automobiles and motorcycles.

Our range includes lightweight 3K carbon fabrics for cosmetic and structural applications, heavier 12K bidirectional fabrics for laminate thickness build-up, and engineered epoxy prepreg systems for consistent, high-performance composite manufacturing. Infusion-grade resin systems and reinforcements further support the production of complex composite components.

Products

Use case

Automotive Aftermarket & Customisation

Carbon fibre has become a defining material in premium automotive customisation, combining distinctive aesthetics with the potential for lightweight construction.

BHOR provides specialised carbon fibre fabrics and high-gloss epoxy resin systems for cosmetic composite applications, including carbon fibre bonnets, mirror caps, fenders, dashboard components, interior trims and other automotive enhancements.

Our materials also support carbon fibre skinning and surface enhancement of existing metal and plastic components, allowing manufacturers and customisation specialists to create premium carbon fibre finishes without necessarily manufacturing the entire component from composite materials.

Products